ISO 9001:2008 Certified
Call Us +91-22-66518819

Inconel 625 Pipe

Supplierof ASTM B444 Inconel 625 Pipe in India, Inconel 625 Pipe & Tube

Inconel 625 Pipes & Tubes


Specification :

Size : 15 NB to 150 NB IN
Type : Seamless / ERW / Welded / Fabricated / LSAW Pipes
Standards : ASME SB-444 ASME S B-444 ASME SB-775 ASME SB-725, UNS N06625 / Werkstoff Nr. 2.4856
End : Plain End, Beveled End, Treaded.
Length : Single Random, Double Random & Cut Length.
Form : Round, Square, Rectangular, Hydraulic Etc.
 
Standards Designation
ASTM B 444
ASME SB 444
 
STANDARD WERKSTOFF NR. UNS JIS AFNOR BS GOST EN OR
Inconel 625 2.4856 N06625 NCF 625 NC22DNB4M NA 21 ХН75МБТЮ NiCr22Mo9Nb ЭИ602
 
Material
Size
Sch.
Specification
Manufacturer
Inconel 625 Seamless Pipe
15 NBTo300 NB
Sch. 5sSch. 10sSch. 40sSch. 80sSch. 160s Sch. XXS
ASTM B163/B751 Alloy 600ASTM B166/B775 Alloy 600ASTM B166/B775 Alloy 600ASTM B167/B751 Alloy 601ASTM B167/B775 Alloy 601ASTM B167/B775 Alloy 601 ASTM B546 Alloy 617 ASTM B444/B704 Alloy 625 ASTM B444/B705/B751 Alloy 625 ASTM B983 Alloy 740 ASTM B729/B464 Alloy 20ASTM B729/B468 Alloy 20ASTM B407/B358 Alloy 800ASTM B163/B515 Alloy 800ASTM B407/B358 Alloy 800HASTM B163/B515 Alloy 800H ASTM B407/B358 Alloy 800HT ASTM B163/B515 Alloy 800HT ASTM B163/B704 Alloy 825 ASTM B423/B705/B751 Alloy 825 Sumitomo Metals, JapanNippon Steel Corporation, JapanKobe Special Tube, JapanSanyo Special Steel, JapanTubacex Tubos Inoxidables S.A., SpainSchoeller Bleckmann, Austria Seah Steel Corporation, Korea
Inconel 625 Welded (ERW) Pipe
15 NBTo300 NB
Sch. 5sSch. 10Sch. 40s &Sch. 80s
Inconel 625 Welded (ERW) Pipe
150 NBTo600 NB
Sch. 5sSch. 10sSch. 40s &Sch. 80s
 
Note:-
Grade
  • Inconel 600
  • Inconel 601
  • Inconel 617
  • Inconel 625
  • Inconel 718
  • Inconel 740
  • Inconel X-750
  • Incoloy Alloy 20
  • Incoloy 330
  • Incoloy 800
  • Incoloy 800H
  • Incoloy 800HT
  • Incoloy 825
  • Incoloy 925
Inconel 625 Special Pipes
Fabricated Pipe (with radiography)
Inconel 625 Pipe In Form of
Round Square Rectangle
Oval Coil Flexible Pipe
Shaft‘U’ ShapeHydraulic pipe etc.
Inconel 625 Pipe In Length of
Standard & Cut length
Inconel 625 Pipe Value Added Service
Draw & Expansion as per required Size & LengthPolish (Electro & Commercial) Heat TreatmentBendingAnnealed & PickledSand BlastingMachining Etc.
Inconel 625 Pipe Test Certificate
Manufacturer Test CertificateLaboratory Test Certificate from Govt. Approved Lab.Under Third Party Inspection
Specialize Pipe
Fabricated PipeSquare & Rectangle &Other Odd Size
 

Chemical Composition :

Ni Fe C Mn Si Cr2 Mo Co Al Ti Nb + Ta P S
58.0 min 5.0 max 0.10 max 0.50 max 0.50 max 20.0-23.0 8.0-10.0 1.0 max 0.40 max 0.40 max 3.15–4.15 0.015 max 0.015 max

Mechanical & Physical Properties :

Density 8.4  g/cm3
Melting Point 1350 °C (2460 °F)
Tensile Strength Psi – 1,35,000 , MPa – 930
Yield Strength (0.2%Offset) Psi – 75,000 , MPa – 517
Elongation 42.5 %


Value Added Services

  • Hot Dipped Galvanizing
  • Epoxy & FBE Coating
  • Electro Polish
  •  Draw & Expansion

ASTM B444/ B704/751 / B705/751 Inconel 625 Pipes & Tubes Features (seamless & welded)

Inconel 625 Seamless Pipe
Inconel 625 Welded and Welded-and-Drawn Pipe

Inconel 625 Seamless Pipe

  • Seamless (SMLS) pipe is formed by drawing a solid billet over a piercing rod to create the hollow shell. Seamless pipe withstands pressure better than other types, and is often more easily available than welded pipe.
  • Inconel 625 Seamless Pipe is extruded and drawn from a billet
  • Seamless piping simply avoids the potential for any defect in the corrosion resistance of the weld area

Inconel 625 Welded and Welded-and-Drawn Pipe

  • Welded pipe is formed by rolling plate and welding the seam. The weld flash can be removed from the outside or inside surfaces using a scarfing blade. The weld zone can also be heat treated to make the seam less visible.
  • Inconel 625 welded pipe is produced from a strip that is roll formed and welded to produce a pipe
  • Welded pipe is considerably less expensive than seamless pipe and is readily available in long continuous lengths.
  • Large-diameter pipe (25 centimetres (10 in) or greater) may be ERW, EFW or Submerged Arc Welded pipe.


ASTM B444/ B704/751 / B705/751 Inconel 625 Pipes & Tubes Stock

IPE TUBE TYPE NB SIZES SCH 5 SCH 10 SCH 40 SCH 80 SCH 160
ASTM B444/ B704/751 / B705/751 Inconel 625 Pipes & Tubes
1/8″
ASTM B444/ B704/751 / B705/751 Inconel 625 Pipes & Tubes
1/4″
ASTM B444/ B704/751 / B705/751 Inconel 625 Pipes & Tubes
3/8″
ASTM B444/ B704/751 / B705/751 Inconel 625 Pipes & Tubes
1/2″
ASTM B444/ B704/751 / B705/751 Inconel 625 Pipes & Tubes
3/4″
ASTM B444/ B704/751 / B705/751 Inconel 625 Pipes & Tubes
1″
ASTM B444/ B704/751 / B705/751 Inconel 625 Pipes & Tubes
1 1/4″
ASTM B444/ B704/751 / B705/751 Inconel 625 Pipes & Tubes
1 1/2″
ASTM B444/ B704/751 / B705/751 Inconel 625 Pipes & Tubes
2″
ASTM B444/ B704/751 / B705/751 Inconel 625 Pipes & Tubes
2 1/2″
ASTM B444/ B704/751 / B705/751 Inconel 625 Pipes & Tubes
3″
ASTM B444/ B704/751 / B705/751 Inconel 625 Pipes & Tubes
4″
ASTM B444/ B704/751 / B705/751 Inconel 625 Pipes & Tubes
5″
ASTM B444/ B704/751 / B705/751 Inconel 625 Pipes & Tubes
6″